Telescopic lifting towers “Top Loading”. Removable legs & base with wheels
Telescopic lifting tower specially certified to lift loads of up to 280 kg (17.10 ft) to a maximum height of 5.20 metres (617 lb).
| SPECIFICATIONS | ELC-780 |
| Maximum Height | 5.20 m I 17.10 ft |
| Maximum Load | 280 kg I 617 lb |
| Safety System | ASB System (Automatic Safety Blocking System) |
| Brake Winch | AL-KO OPTIMA 901 (900 kg) |
| Wheels | Secured to the base with 4 fixing points |
| Folded Dimensions | Height: 1.75 m I 5.74 ft – Base: 42 x 42 m I 1.38×1.38 ft |
| Material | Steel |
| Complies with Standards | DGUV 17 & 18, DGUV Rule 115-002 (Formerly BGV-C1) |
| DIN EN 17206 (Replaces DIN 56950-1), 2006/42/CE | |
| Net Weight | 89 kg I 196 lb |
| Adaptors | Ø 55 mm I Ø 0.18 ft |
Maximum height: 5.20 m (17.10 ft) / Maximum load capacity: 280 kg (617 lb)
ELC-780 has two safety systems which guarantee maximum reliability during the lifting and lowering procedure.
1.- Automatic brake winch from the Austrian manufacturer AL-KO Ref. AL-KO OPTIMA 901 (900 Kg)
Its auto-block system ensures the load remains at the required height; once the required height is achieved, the braking mechanism blocks the load when the handle is released.
2.- ASB System (Automatic Safety Blocking System).
Zip/Trigger safety system with safety bolts. In the extreme case of cable breakage, the safety bolt would immediately block the mast, stopping the load from falling.
The ELC-780 tower is manufactured with the most advanced welding equipment which guarantees the highest level of safety and strength, complying with the lightweight, sturdiness and manoeuvrability requirements needed to lift heavy loads.
ELC-780 towers comply with the safety requirements according to the following Standards and Regulations:
- DGUV Regulation 17 & 18
- DGUV Rule 115-002
- DIN 56950-1
- 2006/42/CE
VERY IMPORTANT: THE LIFT IS NOT TO BE USED AS A HOIST FOR LIFTING PEOPLE.
The compact base of 42 x 42 cm, is specially designed to allow access to reduced spaces with the tower.
It is equipped with four detachable stabiliser legs, provided with leveller screw jacks that have reinforced nylon spin handles (ergonomic design) with a double-start thread (quicker adjustment) which facilitates the levelling task and chrome foot plates with non-slip injection moulded rubber pads. These foot plates ensure a perfect adjustment of the tower to the floor surface.
This wind-up stand consists of four telescopic sections made in reinforced steel and finished in a textured, black, anti-scratch, powder coating (Epoxy). This finish makes the tower suitable for outdoor use, guaranteeing maximum corrosion resistance.
The masts are equipped with:
a) Oversized welded reinforced ending which strengthens the mast.
b) Internal cushioning system to prevent wobbling of the mast sections when extended (on all four sides).
c) Double drawback pulley
d) Pulley protectors which reduce the chance of damage to the pulleys during handling and transportation at the same time preventing the cable from coming off the pulleys.
e) The top mast comes with a reinforcing ferrule with an ergonomic metallic knob.
For a quick, safe and effortless lifting process, ELC-780 telescopic towers are equipped with an Ref. AL-KO OPTIMA 901 (900 Kg) hand winch with automatic braking system, which stops and holds the load at the desired height: once you have reached the desired height, by letting go of the winch handle the braking system automatically stops and holds the load in place.
The mast sections are extended by means of a set of pulleys with bearings and a galvanised steel wire rope with steel core (Composition: 7×19+0), specially manufactured for lifting heavy loads (DIN 3060).
Note: The masts are blocked at the desired height using the safety bolts (essential during the use of the tower.
It is provided with a spirit level, for a proper vertical adjustment of the telescopic masts and levelling of the tower.
Its base is provided with four heavy-duty swivel castors to make handling and transport an easy task. The wheels are secured to the base using a metal plate with 4 fixing points; to guarantee a secure fix even when moving the tower on uneven ground.
ELC-780 towers come with a handle to help with handling.
It has a compact design for easy handling, transportation and storage and is perfectly manageable by one technician, saving on time and increasing productivity.
GUIL ELC-780 Technical Specifications
GUIL ELC-780 Lifting Towers Certificate
DETAILS AND COMPONENTS THAT MAKE THE DIFFERENCE
Ref. ELC-780
Telescopic lifting tower specially certified to lift loads of up to 280 kg (617 lb) to a maximum height of 5.20 metres (17.10 ft).
- ASB System (Automatic Safety Blocking System)
- Zip/trigger safety system. Self-lubricating pulleys. Special Epoxy anti-scratch paint finish (for outdoor use).
- Internal system to prevent wobbling of the tower
- Rectangular legs with chromed foot plates with non-slip injection moulded rubber pads. Spirit level (for correct vertical adjustment)
- Special non-rotating steel wire rope, with steel core, 3 times the strength required. Top section fitted with a reinforcing ferrule.
- Auto-brake Winches (AL-KO) Comply with CE Machinery Directives.
ADAPTORS
RELATED PRODUCTS
| Maximum Height | 5.20 m |
|---|---|
| Maximum Load | 250 Kg |
| Height stowed | 1.75 m |
| Maximum Height | 5.40 m |
|---|---|
| Maximum Load | 150 Kg |
| Height stowed | 1.82 m |
| Maximum Height | 5.15 m |
|---|---|
| Maximum Load | 250 Kg |
| Height stowed | 1.70 m |
| Maximum Height | 6.30 m |
|---|---|
| Maximum Load | 220 Kg |
| Height stowed | 1.70 m |
| Maximum Height | 5 m |
|---|---|
| Maximum Load | 250 Kg |
| Height stowed | 1.98 m |
CHOOSE YOUR LIFTING TOWER
Choose from over 50 models
GUIL – MANUFACTURING LIFTING TOWERS SINCE 1983
We only use the highest quality components for our towers, which guarantees MAXIMUM DURABILITY
SOMETHING ELSE FOR YOUR EVENTS
Start and finish-line arches & Frames for Advertising
Special sizes and shapes available
Retractable belt queue barriers, extendable tape stanchions, braided rope barrier posts